Bluetooth interference can cause your wireless headphones to stutter, audio skip, and even disconnect entirely. This can be a pain when all you want to do is listen to some music or watch a movie. This problem becomes especially irritating when you’re doing something important, like dialing into a work call or getting some mid-commute studying in. It can really disrupt your productivity. That’s why, this article aims to save you from all that. Here, we’ll talk about Bluetooth interference, and how you can avoid it.

What Is a Bluetooth Interference

Bluetooth is a type of wireless connection that’s found in a lot of devices these days. But despite its popularity, it’s not perfect. One of the most common problems that Bluetooth users experience is Bluetooth interference. Based on the name itself, this problem happens when something (tangible or not) ‘interferes’ with the Bluetooth connection. Common signs of Bluetooth interference include:

Hearing a static sound: When other devices in your proximity are using the 2.4GHz frequency, you may occasionally hear static or buzzing sounds. Worse, aside from this being annoying, constant static sounds can add unnecessary noise that affects your hearing. Static sounds happen because of the activity happening on the same frequency, which overlaps with the connection between your devices.  Sound delays: Unlike wired headphones, your audio needs to be compressed and travel through frequencies from your audio source to your headphone speakers when using Bluetooth headphones. And just like when you’re traveling from one place to another, interruptions cause delays on your estimated arrival time. In the case of Bluetooth headphones, it can result in audio that sounds like it’s a step behind everything else. Connection dropping: Bluetooth interference can cause your Bluetooth connection to intermittently disconnect. This can be the result of a physical obstruction that’s preventing a reliable connection between your two paired devices. When this happens, your device will disconnect, and attempt to reconnect until it does so successfully.

Why Do Bluetooth Interferences Happen

There are a few reasons why Bluetooth interference occurs. Moreover, sometimes it can even be a combination of multiple reasons. Below are some of the primary causes:

Wi-Fi

Your average Wi-Fi router uses the 2.4GHz frequency to talk to other devices on the network. Bluetooth uses the same frequency. Because of this, Wi-Fi connections can overlap with Bluetooth and cause interference.

Microwave ovens and fluorescent lights

When in operation, microwaves emit electromagnetic waves that disrupt the 2.4GHz wavelength. Just being near a working microwave can cause connection loss. A similar problem can be found with fluorescent lights.

Physical obstructions

Bluetooth is a wireless connection. This means it’s vulnerable to connection loss if there are objects between the devices. Some materials can absorb or reflect wireless signals more than others. This chart is helpful in knowing what materials to avoid when using Bluetooth.

Range

Bluetooth devices are sorted into groups based on the power needs of their Bluetooth chip. This affects how far they can broadcast.

Class 3 has an intended range of less than 10 meters. Class 2 has an intended range of 10 meters or 33 feet. Class 1 has an intended range of 100 meters or 328 feet.

As your connected device moves farther, you’ll notice more connection drops. When out of range, the device will disconnect completely.

Firmware needs updating

Up-to-date firmware ensures you’re receiving the latest patches, hotfixes, and compatibility fixes. With outdated firmware, your Bluetooth functionality could be patchy. And, it can leave your device susceptible to bugs that might already be fixed by developers.

How to Avoid Bluetooth Interference and Improve Your Connection

If Bluetooth interference holds you back in your daily activities, here are a few tips on how to fix this issue:

Find out what causes the interference

This step is the most critical because you need to know where to start before you can implement a solution. There are two ways you can go about doing this.

Turn other devices off and on again.

A simple (but effective) way of isolating the interfering device. Turn a device off, then check for interference. If there’s still interference, turn the device back on, and repeat with the next device. Continue this process until you find the device that was causing interference.

Using third-party apps

Third-party apps, like Netspot and Bluetooth Smart Scanner, allow you to see if any wireless interference is occurring by scanning the wireless channels in your area.

Turn other wireless devices off

Other wireless devices can affect the connection, as they may use the same wavelength. Devices like wireless speakers, baby monitors, and microwaves can cause interference. Wi-Fi routers also influence your Bluetooth connection. Once you’ve done the previous step, you should be able to identify the device that’s causing the interference. If possible, turn this device off when using Bluetooth is prioritized. But, sometimes turning specific devices off may not be practical. In this case, moving further away from them can also help.

Stay within the range limit

The range limit for most Bluetooth headphones is 33 feet. If you’re farther than 33 feet from your device, your Bluetooth connection will slowly break down. To get the most out of your headphones, keep the two devices close together. However, not all headphones are limited to a range of 33 feet. You can check the range of your headphones by reading the manual, or by reaching out to the manufacturer.

Stay away from obvious obstructions

As mentioned, it’s best practice to have both Bluetooth devices close to each other at all times. Some obstructions are worse than others, with metal being the worst. But, even your own body can act as an obstruction. Your body contains a lot of water, which can be known to interfere with Bluetooth connections. To maintain a strong connection, keep a clear line of sight between the audio source and your Bluetooth headphones.

Do a reset regularly

Resetting your headphones every month or so (or, when you’re experiencing issues) helps fix connectivity issues. Over time, some Bluetooth headphones build a cache of the devices that they’ve paired with. This can cause them to default to other devices when you’re trying to connect. Resetting them removes this cache, and resets all other settings.

Change your WiFi’s channel

The 2.4GHz wavelength contains multiple channels. You can help free up channels by specifying a channel for your Wi-Fi to operate on. You can change your Wi-Fi channel in the settings of your router. Consult the manufacturer’s website for specific instructions.

Update your firmware

Keeping your firmware updated is imperative. Updates include bug and compatibility fixes. Without them, you may encounter bugs, performance issues, or connectivity issues. Make it a habit to commonly check for updates on your phone, as well as any other devices used with your headphones.

Conclusion

Now that you’ve figured out what causes Bluetooth interference, you have a better chance to combat it. If it’s something that you can’t fix immediately, at least you’re aware of how to avoid it going forward. If fixing the interferences didn’t solve your Bluetooth problems, perhaps you’re experiencing a different issue. Luckily, we have separate guides for when your Bluetooth headset is connected but has no sound, and if it keeps cutting out.  With all these, you can now workout, watch your TV, play some MMORPG, or chill with your PC, at peace with your headphones on! What was causing Bluetooth interference for you? Let us know in the comments.

How to Avoid Bluetooth Interference in Headphones - 27How to Avoid Bluetooth Interference in Headphones - 83How to Avoid Bluetooth Interference in Headphones - 84